Question: is there a way to turn down the audio gain from the I/O DIN connection on the back the Orion? I have 2 Orions and have them connected to a Yankee Clipper SO2R+ which feeds the audio thru to
Jack, see page 28 of the Orion manual: "Pin 4 is line level audio output. Which receiver(s) are output to here and the level of audio sent to the jack are controlled by the Line Out Src and Line Out
Jack: Under [Menu], [Other]: You can use [Line out Level] to select Low, Medium or high. Default is High. That should correct your problem. Good luck! 73, Jack, W9OWO Question: is there a way to turn
As far as I am aware, no. But it's easy to add an in-line pad to drop the output down to whatever you need - just a simple voltage divider (two resistors) will do. I think it's actually a feature tha
Check your manual for the DIN jack. Mine is item #80 on page 28 & it states that Pin 4 of the DIN connector is 'line level audio output. Which receiver(s) are output to here and the level of audio se
The 'OTHER' menu provides a setting of High, Medium or Low for the Line Level Output 73 Dave WA3F -- Original Message -- From: "Michael Cheponis" <Michael@Cheponis.Com> To: "Discussion of Ten-Tec Equ
thank you, jack ak7o The 'OTHER' menu provides a setting of High, Medium or Low for the Line Level Output 73 Dave WA3F -- Original Message -- From: "Michael Cheponis" <Michael@Cheponis.Com> To: "Disc
thank you, jack ak7o Check your manual for the DIN jack. Mine is item #80 on page 28 & it states that Pin 4 of the DIN connector is 'line level audio output. Which receiver(s) are output to here and
thanks for the suggestion, jack ak7o Jack, see page 28 of the Orion manual: "Pin 4 is line level audio output. Which receiver(s) are output to here and the level of audio sent to the jack are control
thank you, I have learned that the OTHER menu item on the Orion allows for LOW MEDIUM HIGH. I will try that first. jack ak7o Question: is there a way to turn down the audio gain from the I/O DIN conn
thank you jack ak7o Jack: Under [Menu], [Other]: You can use [Line out Level] to select Low, Medium or high. Default is High. That should correct your problem. Good luck! 73, Jack, W9OWO Question: is