Hi, that my 1st post here as a fresh OII owner. I am in the middle of the first serious contest cqww160. Already in the beginning of the contest OII developed a following problem: Whenever I play aro
Try checking where you have the taps set under FILTER . I find that at other than even spacings of 20 - the DSP will start oscillating at narrow bandwidths when you vary the BW. It seems ok at taps s
Tonno: I sounds like there may be a problem in your radio. I am using my Orion II with 2.037j in the 160 meter contest this weekend with NR and NB with BW down to 100 Hz with no problem. Maybe reload
Tono have you done a Master Reset? and a Ram-Clear? do the Ram-Clear first. (The link on RFSquared no longer works for the Ram-Clear) A) Ram Clear 1) hold down VFOB LCK button at power-up 2) continue
Exactly. After playing with the Taps setting, I leave mine permanently set on the default 199. Lower Taps setting can cause the DSP filter to have multiple peaks out of the nominal passband. Although
Tono have you done a Master Reset? and a Ram-Clear? do the Ram-Clear first. (The link on RFSquared no longer works for the Ram-Clear) A) Ram Clear 1) hold down VFOB LCK button at power-up 2) continue
Thank you guys for suggestions, I will be in my QTH again in a few weeks and will check the taps and do the resets and will let you know if that will take care of the problem. Maybe will reinstall th
Thanks to K7HP and W4ZV for the taps hint! Changing the taps value from 169 to 199 cured the oscillation problem immidiately! Mine was set to 169 as default for some reason. Reading manual now I can'