Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TenTec\]\s+trouble\s+interfacing\s+OMNI\s+VI\s+to\s+N1MM\s+via\s+serial\s+port\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TenTec\]\s+trouble\s+interfacing\s+OMNI\s+VI\s+to\s+N1MM\s+via\s+serial\s+port\s*$/: 3 ]

Total 3 documents matching your query.

1. [TenTec] trouble interfacing OMNI VI to N1MM via serial port (score: 1): Author: Joseph Holstein <n8ea@prodigy.net>; Date: Thu, 17 Nov 2011 09:36:14 -0800 (PST); followed instructions in the TenTec manual and have pins 2 and 3 and 7 on the DB 25 going to the DB 9 . DB 9 has pins 4 and 6 shorted. Followed directions in N1MM for Omni VI - 1200 baud etc. Pin 5; /archives//html/TenTec/2011-11/msg00271.html (7,730 bytes)
2. Re: [TenTec] trouble interfacing OMNI VI to N1MM via serial port (score: 1): Author: Ed <autek@comcast.net>; Date: Fri, 18 Nov 2011 11:34:26 -0500; You need pins 2, 3, and 5. on the db9. You need pins 2, 3, and whatever the pin is for ground on the db 25. Thats all. 1200 baud is way too low for the 6. Set the baud to maximum. Ed W3NR ___________; /archives//html/TenTec/2011-11/msg00272.html (8,211 bytes)
3. Re: [TenTec] trouble interfacing OMNI VI to N1MM via serial port (score: 1): Author: Barry N1EU <barry.n1eu@gmail.com>; Date: Fri, 18 Nov 2011 12:03:35 -0500; ground is pin 7 and Joe had that: "Pin 5 on DB9 connects to pin 7 on the DB25" 1200 baud works fine 73, Barry N1EU _______________________________________________ TenTec mailing list TenTec@contestin; /archives//html/TenTec/2011-11/msg00274.html (9,080 bytes)

Current List: 1 - 3
Page: [1]