- 1. [TowerTalk] 60/40 solder (score: 1)
- Author: John Hudson <jd_hudson@comcast.net>
- Date: Tue, 12 May 2009 09:41:24 -0500
- Will 600-800 watts (AL-811H) melt 60/40 solder? I made a jumper for my ladder line, LARGE banana plugs on the end plugged into a disconnect homebrew box with large jacks. The lugs on the jacks came u
- /archives//html/Towertalk/2009-05/msg00273.html (6,633 bytes)
- 2. Re: [TowerTalk] 60/40 solder (score: 1)
- Author: John Hudson <jd_hudson@comcast.net>
- Date: Tue, 12 May 2009 18:04:26 -0500
- Thanks to all that responded... I was pretty sure that I could not melt the solder joints BUT I had to ask just make sure.. and to clarify the 600-800 watts is from a AMP.. but there where two solder
- /archives//html/Towertalk/2009-05/msg00277.html (11,757 bytes)
- 3. Re: [TowerTalk] 60/40 solder (score: 1)
- Author: "Peter Voelpel" <df3kv@t-online.de>
- Date: Wed, 13 May 2009 01:21:53 +0200
- It will not take much power to get way more then 1A through a piece of copper wire in a RF tuned system. and when the solder joint is not weather proof protected. 73 Peter ___________________________
- /archives//html/Towertalk/2009-05/msg00278.html (7,616 bytes)
- 4. Re: [TowerTalk] 60/40 solder (score: 1)
- Author: Michael Tope <W4EF@dellroy.com>
- Date: Tue, 12 May 2009 17:04:25 -0700
- More like 1000 amps to get one watt dissipated in a 1 microhms connection (I^2*R)[voltage drop would be 1 millivolt across the 1 microhm joint]. With 1000 watts of drive you would need a system imped
- /archives//html/Towertalk/2009-05/msg00279.html (8,520 bytes)
This search system is powered by
Namazu