I will be installing a UST HDX-572MDPL in a month or so. The UST FAQ calls for 1"x27" anchor bolts; ATSM F1554 Gd.55. I had gone through many of the very interesting TT archives where anchor bolts we
http://www.shopjfi.com/1-8-x-30-bent-anchor-bolt-hot-dipped-galvanized-3-hook-length-1-pc.html Joe Sent from my iPad _______________________________________________ _________________________________
Les try Atlantic Bolt , when i put my TX-472 up they knew exactly what I was talking about , I faxed them the info I had from UST and in a couple of days I had my bolts in hand , about $200 less then
I just received my base for a UST 589 and it came with 6 base bolts. You sure they're not going to send them? _______________________________________________ _________________________________________
My 589 UST supplied bolts were not galvanized. McMaster has suitable bolts. Grant KZ1W I will be installing a UST HDX-572MDPL in a month or so. The UST FAQ calls for 1"x27" anchor bolts; ATSM F1554 G
I guess I should have mentioned that this a used tower which is why I need bolts. Les W2LK I will be installing a UST HDX-572MDPL in a month or so. The UST FAQ calls for 1"x27" anchor bolts; ATSM F15
I was curious if McMaster had those. The bolts I saw were "low stength" and didn't comply with ATSM F1554 Grade 55. Google is pretty much one's friend when searcing for a supply of the higher streng
IIRC, in the bigger picture, the anchor rods for my TX-472 weren't all that expensive, direct from UST. They are not galvanized. vy 73, Bryan WA7PRC -- I was curious if McMaster had those. The bolt
Author: "Roger (K8RI) on TT" <K8RI-on-TowerTalk@tm.net>
Date: Tue, 20 Aug 2013 01:02:33 -0400
I like the LM470 base mount. They weld 19" X 3" X 1/2" ears to the #10 rerod coming up out of the concrete. IIRC these have 7, 3/4" holes to hold the base and raising fixture. Once tthe concrete has
they wont last very long. Galvanized NUTS will make a sloppy fit on any NON galvanized anchor rod ! And if you use NON galvanized NUTS on any NON galvanized anchor rods... both will simply rust. The
Good physical connection between threaded rod and concrete is GOOD. Large HD washers with a nut on both sides at intervals along the threaded rod help make a good connection. Washers can be made from