- 1. [TowerTalk] Cross Bar Suggestion (score: 1)
- Author: "Dick, WN3R" <WN3R@arrl.net>
- Date: Wed, 10 Nov 2004 09:02:03 -0500
- I need to know what kind and size of "pipe" to use as a cross piece near the top of the tower. Sailboat standard eye bolts, ropes, and blocks (pulleys) will be installed near the ends to support wire
- /archives//html/Towertalk/2004-11/msg00314.html (7,520 bytes)
- 2. Re: [TowerTalk] Cross Bar Suggestion (score: 1)
- Author: "RICHARD BOYD" <ke3q@msn.com>
- Date: Thu, 11 Nov 2004 16:48:06 -0500
- I think a lot of us use steel angle rather than pipe, because then you don't need a plate to mate the two pieces of pipe. A steel angle 2-4' long, with a single "muffler clamp" (U-bolt with saddle, a
- /archives//html/Towertalk/2004-11/msg00317.html (9,048 bytes)
- 3. Re: [TowerTalk] Cross Bar Suggestion (score: 1)
- Author: Cqtestk4xs@aol.com
- Date: Thu, 11 Nov 2004 17:35:44 EST
- A steel angle 2-4' long, with a single "muffler clamp" (U-bolt with saddle, available in a range of sizes from auto supply stores) and a pulley at each end should do the trick Great idea Rich....One
- /archives//html/Towertalk/2004-11/msg00318.html (7,297 bytes)
- 4. Re: [TowerTalk] Cross Bar Suggestion (score: 1)
- Author: "w9ge" <finger@goeaston.net>
- Date: Fri, 12 Nov 2004 06:38:44 -0500
- Dick: Yes, a 2 by 2 piece of Oak 8 to 10 feet long, heavily varnished and guyed with non conductive rope or Phyllistran. Keeps things non conductive and wires and feedpoints away from the tower. 73 b
- /archives//html/Towertalk/2004-11/msg00331.html (9,284 bytes)
- 5. Re: [TowerTalk] Cross Bar Suggestion (score: 1)
- Author: "RICHARD BOYD" <ke3q@msn.com>
- Date: Fri, 12 Nov 2004 11:46:29 -0500
- Sounds like a good idea that should work and also keeps it down to just one U-bolt and avoids having to acquire and drill a plate and use 4 U-bolts. Even a pressure-treated 2X2 (pine), which is what
- /archives//html/Towertalk/2004-11/msg00353.html (11,108 bytes)
This search system is powered by
Namazu