- 1. [TowerTalk] G-2800DXA Resistance readings (score: 1)
- Author: "D. Drake" <daleaa1qd@gmail.com>
- Date: Sun, 13 Sep 2015 18:30:51 -0400
- Stew, My G-2800DXA has the newer Molex style plug but the resistance readings are as follows - Pins 1, 2 and 3 go to the 500 ohm position pot with pin 2 being the wiper. Also pin 3 is grounded at the
- /archives//html/Towertalk/2015-09/msg00187.html (7,751 bytes)
- 2. Re: [TowerTalk] G-2800DXA Resistance readings (score: 1)
- Author: Jim Brown <jim@audiosystemsgroup.com>
- Date: Sun, 13 Sep 2015 16:36:38 -0700
- On Sun,9/13/2015 3:30 PM, D. Drake wrote: Pins 1, 2 and 3 go to the 500 ohm position pot with pin 2 being the wiper. Also pin 3 is grounded at the rotor. So my measured resistance from pin 1 to 3 was
- /archives//html/Towertalk/2015-09/msg00188.html (7,775 bytes)
- 3. Re: [TowerTalk] G-2800DXA Resistance readings (score: 1)
- Author: "john@kk9a.com" <john@kk9a.com>
- Date: Mon, 14 Sep 2015 06:41:24 -0500
- I think D. Drake is correct. http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=104&encProdID=E0526A9F285ECCF36F75CC3FEC992990&DivisionID=65&isArchived=0 Also as he mentioned the outdoor
- /archives//html/Towertalk/2015-09/msg00189.html (8,901 bytes)
- 4. Re: [TowerTalk] G-2800DXA Resistance readings (score: 1)
- Author: Mark Pride via TowerTalk <towertalk@contesting.com>
- Date: Mon, 14 Sep 2015 11:55:19 +0000 (UTC)
- I concur with Dale's description. G2800DXA model (with Cinch connector on control box) - Also the same for the G1000DXA model. 1,2,3 are for the potentiometer 4,5 are the motor and 6 relates to the
- /archives//html/Towertalk/2015-09/msg00190.html (9,930 bytes)
This search system is powered by
Namazu