- 1. [TowerTalk] Jumper Cable Fabricator (score: 1)
- Author: Richard Solomon <dickw1ksz@gmail.com>
- Date: Mon, 6 Jan 2020 11:23:29 -0700
- I need some pre-made jumper cables for the shack. Prefer to use LMR-200 or LMR-240. Any vendor recommendations ? Tnx, Dick, W1KSZ _______________________________________________ _____________________
- /archives//html/Towertalk/2020-01/msg00102.html (6,493 bytes)
- 2. Re: [TowerTalk] Jumper Cable Fabricator (score: 1)
- Author: Gedas <w8bya@mchsi.com>
- Date: Mon, 6 Jan 2020 14:04:33 -0500
- L-Com Gedas, W8BYA Gallery at http://w8bya.com Light travels faster than sound.... This is why some people appear bright until you hear them speak. Any vendor recommendations ? Tnx, Dick, W1KSZ _____
- /archives//html/Towertalk/2020-01/msg00104.html (7,341 bytes)
- 3. Re: [TowerTalk] Jumper Cable Fabricator (score: 1)
- Author: "Joe K2UF" <joe@k2uf.com>
- Date: Mon, 6 Jan 2020 15:08:03 -0500
- Hi Dick, I use JEFATECH.COM for my pre-made short jumpers I use for interconnections in the shack. They will build any size jumper from 1 foot and up with a choice of connectors on either end. Good l
- /archives//html/Towertalk/2020-01/msg00105.html (6,916 bytes)
- 4. Re: [TowerTalk] Jumper Cable Fabricator (score: 1)
- Author: Bryan Fields <Bryan@bryanfields.net>
- Date: Mon, 6 Jan 2020 16:37:51 -0500
- Tessco is great for this. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ _______________________________________________ TowerTalk mailing
- /archives//html/Towertalk/2020-01/msg00106.html (7,489 bytes)
- 5. Re: [TowerTalk] Jumper Cable Fabricator (score: 1)
- Author: Jim Brown <jim@audiosystemsgroup.com>
- Date: Tue, 7 Jan 2020 10:51:42 -0800
- Why? If diameter, RG400 or RG142 is a far better choice, because the double silver-coated copper braid provides MUCH superior shielding. Much of the cost of cable fab is labor; use of the better coax
- /archives//html/Towertalk/2020-01/msg00112.html (8,129 bytes)
- 6. Re: [TowerTalk] Jumper Cable Fabricator (score: 1)
- Author: john@kk9a.com
- Date: Tue, 07 Jan 2020 13:49:55 -0600
- Premade cables are quite expensive compared to homebrew so you have carefully evaluate your skill level and the value of your time. For example a 6' RG400 premade PL-259 jumper is over $60. If you sh
- /archives//html/Towertalk/2020-01/msg00120.html (7,891 bytes)
- 7. Re: [TowerTalk] Jumper Cable Fabricator (score: 1)
- Author: Danny K5CG via TowerTalk <towertalk@contesting.com>
- Date: Tue, 7 Jan 2020 11:58:31 -0800 (PST)
- $33 at http://wifiexpert.us/customRFCable.php I've used this place for a while and had no problems. Premade cables are quite expensive compared to homebrew so you have carefully evaluate your skill l
- /archives//html/Towertalk/2020-01/msg00121.html (9,355 bytes)
- 8. Re: [TowerTalk] Jumper Cable Fabricator (score: 1)
- Author: Jim Brown <jim@audiosystemsgroup.com>
- Date: Tue, 7 Jan 2020 12:21:44 -0800
- On 1/7/2020 11:49 AM, john@kk9a.com wrote: Premade cables are quite expensive compared to homebrew so you have carefully evaluate your skill level and the value of your time. For example a 6' RG400
- /archives//html/Towertalk/2020-01/msg00123.html (8,765 bytes)
This search system is powered by
Namazu