- 1. [TowerTalk] KT34-XA over hall (score: 1)
- Author: MARKV@SNC-LAVALIN.COM (Vitaly Markhasin)
- Date: Thu, 17 Jun 1999 16:04:38 -0400
- Hi All, My antenna is down on the roof and is just about to be completely serviced after 18 years on the tower... 2 questions: 1. I've tried to start the work with the easiest element - 10m. Well, I'
- /archives//html/Towertalk/1999-06/msg00161.html (7,738 bytes)
- 2. [TowerTalk] KT34-XA over hall (score: 1)
- Author: K7LXC@aol.com (K7LXC@aol.com)
- Date: Thu, 17 Jun 1999 16:52:46 EDT
- Yep. The main ingredient is the vehicle which is the paste part of it that holds the metallic particles in suspension. Current anti-oxidant pastes use molybdemum, petroleum or other materials. These
- /archives//html/Towertalk/1999-06/msg00163.html (7,862 bytes)
- 3. [TowerTalk] KT34-XA over hall (score: 1)
- Author: gdaught6@leland.Stanford.EDU (George T. Daughters)
- Date: Thu, 17 Jun 1999 14:15:34 +0008
- Vitaly asked.... Yes. You have to drill out the dented region with a 1/4 inch drill; drill thorough both the inner and outer tubes. Then with a bit of work and cursing you should be able to separate
- /archives//html/Towertalk/1999-06/msg00165.html (8,329 bytes)
- 4. [TowerTalk] KT34-XA over hall (score: 1)
- Author: w1uk@downcity.net (J. Parise)
- Date: Fri, 18 Jun 1999 21:09:25 -0400
- Before you start drilling and blasting try a squeeze with a pair of pliers on the sides where the indent is. A little side to sided twisting of the inner piece of tubing and it will come right out. R
- /archives//html/Towertalk/1999-06/msg00181.html (8,246 bytes)
- 5. [TowerTalk] KT34-XA over hall (score: 1)
- Author: mcduffie@scottsbluff.net (Gary McDuffie, Sr.)
- Date: Wed, 30 Jun 1999 10:02:41 -0600
- Hy-Gain people (the real Hy-Gain, not the new one) don't even recommend conductive paste. They recommend plain aluminum anti-oxidant you can buy at your local electrical wholesaler or elsewhere. Gary
- /archives//html/Towertalk/1999-06/msg00344.html (7,881 bytes)
This search system is powered by
Namazu