- 1. [TowerTalk] LMR- 600 Ultraflex (score: 1)
- Author: Cqtestk4xs@aol.com
- Date: Thu, 8 Dec 2005 20:45:10 EST
- Recently I posted about the problem I was having with the defective LMR400 Ultraflex cracking, and how times was going to send me 450 feet of really nice upgraded stuff. Today, I received an email sa
- /archives//html/Towertalk/2005-12/msg00154.html (7,219 bytes)
- 2. Re: [TowerTalk] LMR- 600 Ultraflex (score: 1)
- Author: "JamesMNelson" <james_junk_mail@comcast.net>
- Date: Thu, 8 Dec 2005 20:19:32 -0600
- Bill, As I remember LMR600 is not much different than LMR400. If I remember correctly, the only big difference is that LMR600s dielectric is a little bit thicker; therefore the cable itself is a litt
- /archives//html/Towertalk/2005-12/msg00155.html (9,300 bytes)
- 3. Re: [TowerTalk] LMR- 600 Ultraflex (score: 1)
- Author: "Keith Dutson" <kdutson@sbcglobal.net>
- Date: Thu, 8 Dec 2005 22:39:05 -0600
- The 600 in LMR600 represents the outer diameter of the cable, .600 inch. This is really heavy duty cable. I have a couple runs going up my tower. Putting on the special connectors is quite easy. The
- /archives//html/Towertalk/2005-12/msg00157.html (9,239 bytes)
- 4. Re: [TowerTalk] LMR- 600 Ultraflex (score: 1)
- Author: "J. Hector Garcia XE2K" <hector@telecom1.net>
- Date: Thu, 08 Dec 2005 22:12:05 PST
- Good stuff, no pain, lower loss than 1/2 inch hard line, long runs for vhf uhf up to 100-150ft @ 2.4 ghz easy to handle and the connectors are expensive than the 400/rg-8 i will take it with out any
- /archives//html/Towertalk/2005-12/msg00163.html (9,701 bytes)
- 5. Re: [TowerTalk] LMR- 600 Ultraflex (score: 1)
- Author: Jim Smith <jimsmith@shaw.ca>
- Date: Thu, 08 Dec 2005 22:53:39 -0800
- I think what James is referring to may be found at http://www.tessco.com/products/displayProducts.do?groupId=576&subgroupId=25 HTH, Jim VE7FO _______________________________________________ See: http
- /archives//html/Towertalk/2005-12/msg00166.html (8,477 bytes)
- 6. Re: [TowerTalk] LMR- 600 Ultraflex (score: 1)
- Author: "JamesMNelson" <james_junk_mail@comcast.net>
- Date: Fri, 9 Dec 2005 08:57:07 -0600
- That is them. I just did not have the time that day to look through the web site. Check out: Tessco Dissipation 46450 Times Microwave ST-600C for ""SOLDER"" on connectors 14300 Times Microwave ST-600
- /archives//html/Towertalk/2005-12/msg00172.html (10,606 bytes)
- 7. Re: [TowerTalk] LMR- 600 Ultraflex (score: 1)
- Author: "Merlin-7 KI4ILB" <merlin-7@sc.rr.com>
- Date: Fri, 9 Dec 2005 18:46:59 -0500
- I use some lmr-600 But I cheated... I took it to a local company that does commercial work and had them install the connectors (they did if for free) they are used to working with hard-line and when
- /archives//html/Towertalk/2005-12/msg00196.html (12,453 bytes)
This search system is powered by
Namazu