- 1. [TowerTalk] PL-259 Threads (score: 1)
- Author: m.mcamis@valley.net (Michael McAmis)
- Date: Wed Jul 16 11:14:37 2003
- I have some CATV hardline with an outer diameter of about .410 and seems that if I could cut the proper threads I could screw a PL-259 right on the cable. Does anyone happen to have info on the inner
- /archives//html/Towertalk/2003-07/msg00250.html (6,675 bytes)
- 2. [TowerTalk] PL-259 Threads (score: 1)
- Author: w6ter@worldnet.att.net (Gerry Smith)
- Date: Wed Jul 16 11:49:15 2003
- I use brass plumbing fixtures soldered to SO-239's or PL-259's for hardline connectors. Easy and cheap. Gerry Smith, W6TER I have some CATV hardline with an outer diameter of about .410 and seems tha
- /archives//html/Towertalk/2003-07/msg00252.html (7,669 bytes)
- 3. [TowerTalk] PL-259 Threads (score: 1)
- Author: W2fca@cs.com (W2fca@cs.com)
- Date: Wed Jul 16 12:12:56 2003
- Hi Since the outside of most CATV hardline is aluminum, why not try just screwing it on? I did that with a larger cable and larger connector. The trick was holding the cable and I used a couple of th
- /archives//html/Towertalk/2003-07/msg00253.html (6,804 bytes)
This search system is powered by
Namazu