Summary of: "To pin or not to pin" -- What's the weight and turning radius of your proposed antenna? The G-800 is a pretty medium duty rotator and 14+ sq.ft. may exceed its capacity. In answer to you
Author: goodnews@mail.cmedic.net (Donald E. Stiles)
Date: Wed, 15 Sep 1999 10:51:49 -0400
Gents, I see an option to the pinning question. "SANDPAPER". The gripping power of this inexpensive and easily installed option will give good results. Use a large grit sandpaper and snug the clamps
I recall from a previous go-round on this subject a fellow recommended a piece of a special belt from a harvester. Seems it is indestructible and doesn't disintegrate from sun. Since sandpaper is on
As I recall, another post from that previous thread also listed something I think was called machinists emery cloth - grit on both sides and water/oil-proof. Haven't tried it myself, but it sounded g
Instead of gluing two pieces of sandpaper together, you can use the sanding mesh that has the grit on both sides. 73, Stew K3ND -- -- -- -- == message truncated == ___________________________________
Instead of gluing two pieces of sandpaper together, you can use the sanding mesh that has the grit on both sides. 73, Stew K3ND -- -- -- -- == message truncated == ___________________________________
Instead of gluing two pieces of sandpaper together, you can use the sanding mesh that has the grit on both sides. 73, Stew K3ND -- -- -- -- == message truncated == ___________________________________
Instead of gluing two pieces of sandpaper together, you can use the sanding mesh that has the grit on both sides. 73, Stew K3ND -- -- -- -- == message truncated == ___________________________________
Instead of gluing two pieces of sandpaper together, you can use the sanding mesh that has the grit on both sides. 73, Stew K3ND -- -- -- -- == message truncated == ___________________________________
Instead of gluing two pieces of sandpaper together, you can use the sanding mesh that has the grit on both sides. 73, Stew K3ND -- -- -- -- == message truncated == ___________________________________
Sorry about the multiple msgs. PC went nuts here, had to shoot it! 73... -- -- -- == message truncated == __________________________________________________ Do You Yahoo!? Bid and sell for free at ht