Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TowerTalk\]\s+TH6DXX\s+Adjustments\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TowerTalk\]\s+TH6DXX\s+Adjustments\s*$/: 7 ]

Total 7 documents matching your query.

1. [TowerTalk] TH6DXX Adjustments (score: 1): Author: nasfred@1bigred.com (Mike Sims); Date: Tue, 29 Dec 1998 08:55:18 -0500; Hello, Need information on what others have found in adjusting a TH6DXX for best SWR in a particular part of a band? The TH6DXX used here is set for the CW. On 20, the SWR is as it should be. However; /archives//html/Towertalk/1998-12/msg00459.html (8,410 bytes)
2. [TowerTalk] TH6DXX Adjustments (score: 1): Author: w7zrc@micron.net (Rod Greene); Date: Tue, 29 Dec 1998 08:40:14 -0700; I am also interested in any advice for the dimensions, etc. for the TH6DXX as I have a used one that I will be rebuilding this Spring. I will probably want to set it for CW on all the bands. I plan t; /archives//html/Towertalk/1998-12/msg00462.html (9,735 bytes)
3. [TowerTalk] TH6DXX Adjustments (score: 1): Author: w7why@harborside.com (Tom Osborne); Date: Tue, 29 Dec 1998 17:20:48 -0800; Hi Mike When I did a rebuild on my TH-3, I just set each band individually. I could lower it down where I could reach it from a ladder on the roof of the shack. I adjusted 10 meters where I wanted it; /archives//html/Towertalk/1998-12/msg00465.html (7,777 bytes)
4. [TowerTalk] TH6DXX Adjustments (score: 1): Author: bragassa@hal-pc.org (Mike Bragassa); Date: Wed, 30 Dec 1998 05:50:32 -0600; Hi Mike: I was thionking like W7WHY's email response; that you will have to adjust all of the hi-vswr elements, (reflector/directors)including the driven element to affect any change in vswr. Thats e; /archives//html/Towertalk/1998-12/msg00472.html (9,924 bytes)
5. [TowerTalk] TH6DXX Adjustments (score: 1): Author: n4kg@juno.com (T A RUSSELL); Date: Tue, 29 Dec 1998 22:50:42 -0600; Where are the 51 ft metal guys relatiave to the TH6? I place my First insulator 3 ft from the tower at EVERY guy point. The Second insulator is 12 ft from the first. The Third insulator is usually 12; /archives//html/Towertalk/1998-12/msg00474.html (7,865 bytes)
6. [TowerTalk] TH6DXX Adjustments (score: 1): Author: n7cl@mmsi.com (Eric Gustafson); Date: Wed, 30 Dec 1998 09:11:59 -0700 (MST); Hi Mike(s), I'll spreade my comments within the quoted inserts of the original messages. To: <towertalk@contesting.com> Not only is it easier said than done, it isn't a good idea either. You have abs; /archives//html/Towertalk/1998-12/msg00478.html (10,914 bytes)
7. [TowerTalk] TH6DXX Adjustments (score: 1): Author: K7LXC@aol.com (K7LXC@aol.com); Date: Wed, 30 Dec 1998 11:33:47 EST; Howard Pabian, a Hy-Gain antenna design engineer, spent six months designing the TH6 doing dozens and dozens of iterations. A one inch change in dimensions took four hours to test and plot. And he ha; /archives//html/Towertalk/1998-12/msg00479.html (8,603 bytes)

Current List: 1 - 7
Page: [1]