I've been following the mail on this subject. I'm going to start my new tower this summer. The base and anchors are already in. It's going to be a 137' rotating 55g tower with three F12 C31XR's stack
I would be cautious using HFTA for calculating optimum stacking distances. FWIW, I have rarely if ever have found a single antenna to be better than my stacks. I would optimize the spacing using all
Hello Rich, Im not sure if this will be inline with the thread youve created, a new thread or somewhere entirely separate... sorry if not inline where I intended it to be. I've had what you're planni
Author: Bill via TowerTalk <towertalk@contesting.com>
Date: Mon, 23 Feb 2015 20:02:37 -0500
I've had lots of experience stacking antennas....from monobanders, to duobanders for WARC to tribanders. I wouldn't think twice about putting up a stack for any band, if money and labor was not an is
Did you just feed upper and lower on 20m? Unless the undriven antenna causes some bad interaction, using all three on 10m and 15m and skipping the middle on 20m could be a good triband stacking solut
Thanks for the replies, I reminded myself that the C31XR has modeled performance information on different stack configurations which will help with stacking distance. I really don't have a lot of opt