- 1. [TowerTalk] Vendors for 1 3/4 inch mast material? (score: 1)
- Author: "Bill Howell" <mrbillmac@gmail.com>
- Date: Tue, 11 Dec 2007 15:16:31 -0600
- I have a Rohn top section which has an OD of 2 inches, so it will only accept a 1 3/4 inch mast inside it.I've found vendors on the web for 2 inch mast, but none for 1 3/4 inch. Does anyone out there
- /archives//html/Towertalk/2007-12/msg00203.html (7,430 bytes)
- 2. Re: [TowerTalk] Vendors for 1 3/4 inch mast material? (score: 1)
- Author: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
- Date: Tue, 11 Dec 2007 21:46:18 -0500
- How about inch and a half schedule 40 pipe? It should just fit. Otherwise you could have a couple of bushings/sleeves made and use 1 1/2" tube. Roger (K8RI) _________________________________________
- /archives//html/Towertalk/2007-12/msg00204.html (7,861 bytes)
- 3. Re: [TowerTalk] Vendors for 1 3/4 inch mast material? (score: 1)
- Author: "Julio Peralta" <jperalta@tampabay.rr.com>
- Date: Tue, 11 Dec 2007 21:52:38 -0500
- If you are going mount an HF beam antenna with 1 3/4" pipe you may have problems getting the antenna to stay pointed in the same direction. Most HF beams will work better with a 2" mast. That is not
- /archives//html/Towertalk/2007-12/msg00205.html (8,032 bytes)
- 4. Re: [TowerTalk] Vendors for 1 3/4 inch mast material? (score: 1)
- Author: "Penninger Radio" <Charles@PenningerRadio.com>
- Date: Wed, 12 Dec 2007 07:18:07 -0600
- Hi all, I have 1 3/4" od x 1/8" or 1/4" wall 6061-T6 aluminum up to 24 feet, pricing is at www.Penninger.com . 73 Charles, KC9DAO. ^ ^ -- Original Message -- From: "Bill Howell" <mrbillmac@gmail.com>
- /archives//html/Towertalk/2007-12/msg00206.html (8,202 bytes)
This search system is powered by
Namazu