- 1. [TowerTalk] Yaesu G-450XL rotor control problem (score: 1)
- Author: "Magnus Aronsson" <sm6wet@telia.com>
- Date: Sat, 14 Dec 2013 17:25:01 -0500
- Hi My rotor controller has given up turning clockwise but works fine anti-clockwise. I had the same problem about a year ago and changed the "right-button" to a new one. Now it happened again. Anyone
- /archives//html/Towertalk/2013-12/msg00293.html (10,934 bytes)
- 2. Re: [TowerTalk] Yaesu G-450XL rotor control problem (score: 1)
- Author: Herb Schoenbohm <herbs@vitelcom.net>
- Date: Sat, 14 Dec 2013 21:34:57 -0400
- Magnus, I had the same problem here on my VHF antenna rotated by the GX-450 and found loose contacts at the crimp portion where the cable is terminated in at the control box plug was what caused it.
- /archives//html/Towertalk/2013-12/msg00299.html (11,766 bytes)
- 3. Re: [TowerTalk] Yaesu G-450XL rotor control problem (score: 1)
- Author: <john@kk9a.com>
- Date: Sat, 14 Dec 2013 21:42:05 -0500
- Before you do a work on the controller I would check the connections, especially on the tower. The Yaesu rubber boot does not offer much protection from the elements. John KK9A Hi My rotor controller
- /archives//html/Towertalk/2013-12/msg00300.html (7,053 bytes)
- 4. Re: [TowerTalk] Yaesu G-450XL rotor control problem (score: 1)
- Author: "Magnus Aronsson" <sm6wet@telia.com>
- Date: Sun, 15 Dec 2013 07:13:23 -0500
- Hi Herb No, it is not any loose connections. I tried a jumper cable and shorted the mid and upper position on the backside of the button turning the rotor clockwise and the rotor turns and indicator
- /archives//html/Towertalk/2013-12/msg00303.html (13,262 bytes)
This search system is powered by
Namazu