- 1. [TowerTalk] YAESU G1000 ROTATOR (score: 1)
- Author: "BA7NQ Terry" <ltw@vip.163.com>
- Date: Thu, 21 Jun 2007 07:59:33 +0800
- Hi OM, MY yaesu G1000 ratator just have a problem, the indicator degree of controller is unequal with the rotator degree. When the rotator rotate from 0 degree to 90 degree, the indicator only show f
- /archives//html/Towertalk/2007-06/msg00665.html (7,471 bytes)
- 2. Re: [TowerTalk] Yaesu G1000 Rotator (score: 1)
- Author: W5KI@aol.com
- Date: Wed, 20 Jun 2007 22:21:15 EDT
- Terry, One of my Yaesu rotors (G-800) has THE EXACT problem and basically the EXACT readings as you have. I suspect it is the control unit in the shack, maybe damaged from a lightning surge. At this
- /archives//html/Towertalk/2007-06/msg00670.html (8,253 bytes)
- 3. Re: [TowerTalk] Yaesu G1000 Rotator (score: 1)
- Author: "k2xx" <k2xx@swva.net>
- Date: Thu, 21 Jun 2007 17:16:56 -0500
- Yes, I have a G2800 and it was behaving in a similar manner after a severe thunderstorm. Yaesu repaired the control box for about $80 or so. I'm not home and I forget the components that were replace
- /archives//html/Towertalk/2007-06/msg00689.html (10,292 bytes)
This search system is powered by
Namazu