If u have purchased a new sealed box of a Yaesu G-2800SDX rotor, please tell me 1. What is the complete list of what comes standard in the box, specifically any 6-wire cable, and any stainless bolts?
Chas, You should have received the rotor, 16 bolts and washers, 125' cable with connectors attached, control box and manual. They originally did not come with the "pin" bolt. The SDX was the first in
No cable comes with the rotor. You get a connector for each end of the cable. Conductor size required depends on how long your cable run is between the controller and the rotor. I have the smaller GX
Charles, I recently bought a spare G-2800DXA from Yaesu as a spare. In outward appearance it looks the same as the SDX. The DXA manual is on the Yaesu-Vertex site. The rotor package comes complete wi
Some of the guys have used the following hardware to cure the mast slipping issue.If I was going to install a 2800, I'd seriously consider this. http://www.championradio.com/Orion-2800-Replacement-Ma
I really doubt that the Yaesu 2800 DXA clamps slips, especially with the factory bolt through the mast. Some of the guys have used the following hardware to cure the mast slipping issue.If I was goin