- 1. [Towertalk] Hy=Gain 402BA-S (score: 1)
- Author: wfking@worldnet.att.net (Wayne F. King)
- Date: Sun, 21 Apr 2002 05:49:32 -0400
- HI Folks, I have a HY-GAIN 402BA-S 40 meter 2 el beam. It works fine on RX and 100 watts TX. However it does not like high power anymore. Instant SWR infinity with the PA on. Even at 200 watts it app
- /archives//html/Towertalk/2002-04/msg00858.html (7,268 bytes)
- 2. [Towertalk] Hy=Gain 402BA-S (score: 1)
- Author: K7LXC@aol.com (K7LXC@aol.com)
- Date: Sun, 21 Apr 2002 12:59:50 EDT
- As I recall (I was never an owner), this is the classic failure mode for this antenna. It's insulator failure and arcing. Cheers and condolences, Steve K7LXC TOWER TECH
- /archives//html/Towertalk/2002-04/msg00877.html (7,055 bytes)
- 3. [Towertalk] Hy=Gain 402BA-S (score: 1)
- Author: k4ik@subich.com (Joe Subich, K4IK)
- Date: Sun, 21 Apr 2002 17:30:26 -0400
- You are correct, Steve. The old Hy-Gain design used the standard driven element insulators in the clamshells of the 402BA but placed the linear loading between the feedpoint and the elements rather
- /archives//html/Towertalk/2002-04/msg00884.html (8,111 bytes)
- 4. [Towertalk] Hy=Gain 402BA-S (score: 1)
- Author: w7ni@easystreet.com (Stan & Patricia Griffiths)
- Date: Sun, 21 Apr 2002 22:32:52 -0700
- Your antenna must be an antique. HyGain's shorty 40's have been called the "Discoverer Series" (1, 2, and 3 element versions) for about 20 years now. The old 402BA's had high RF voltage present at th
- /archives//html/Towertalk/2002-04/msg00892.html (8,728 bytes)
This search system is powered by
Namazu