Hello and thank you for reading this email. To the point: Can TRlinux interface with the localhost (127.0.0.1:4532 hamlib/rigctl default) someway that I am missing versus something like /dev/xxx? I a
I am unsure how the Expert rig works, but I'll make some assumptions and maybe this can help. TR currently interfaces with rigctld by using a command like: RADIO ONE TYPE = rigctld;4532;/dev/ttyTS590
Thank you Kevin for the quick response. However I still cannot get the two to communicate over the tciadapter. I have never seen or used a CFG line like you provided here, only just like the one you
Carlin, Could you try the following and report the results. This will help me know where the problem occurs. First without running trlog: 1. start the tciadapter software on port 4532. 2. In a termin
I have a cronjob to start the tciadapter @reboot like this: "@reboot tciadapter -t localhost:50001" so the adapter was already running upon a fresh start. verified by "ps -aux | grep tci" produces be
Ok some great headway from this end. With the tciadapter running, and ExpertSDR3 running, and from a command line terminal I am able to interact with the SDR!!! I have tested and only gotten this to