Hi there! Is there maybe an option to use RTTY (or cw filter) with AFSK with FT 1000mp field MV? Thanks for info and 73 Goran ANDRIC, S55OO (S50C in WPX) _____________________________________________
There does not seem to be. If you have an MP Mark V - Field or not, you should use FSK as you cannot switch the filters in any other way. I just spent about 5 hours reading AA5NT's Mark V manual tryi
Easy. "User mode" : The manual page 16 and page 80 refers. Set menu 8-6 to rtty-L. then press PKT and hold for 1/2 second - the Mark V is now on RTTY / LSB with afsk input. 73 Thor, TF3MM There does
Yes - but this does not enable the narrow filters. Or, does it? _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listi
yes, you can use the narrow filters. 73 Thor, TF3MM Yes - but this does not enable the narrow filters. Or, does it? <s55oo@lea.hamradio.si>, <writelog@contesting.com> RTTY ___________________________
And when you want to operate AFSK RTTY, what mode do you select? User mode, RTTY or PKT ? -73, N5NJ _______________________________________________ WriteLog mailing list WriteLog@contesting.com http:
you select PKT - hold down the PKT key for half a second - the radio then switches to RTTY/LSB but is accepting afsk input on the Packet input on the back. I use direct FSK with my ST-8000 but found
Thanks Thor. All of that is not obvious from the manual. We'll be ready for the next big RTTY contest! By the way, we're using networked Writelog with MMTTY in Multi-2 and it's working perfectly. If
QSO with you (4W6MM) on 21Mhz during the 2002 Oceania SSB Contest. I have been busy with the CQ 160 Contests and want to send you a card. Sorry I am so far behind. Is it via TF3MM? 73 Dave K4JRB ____
Has anyone managed to get this working on the MkV so you can select either the cw filter in Nar1 or the cw filter in Nar2 (500 Hz and 250 Hz respectively in my rig)? I haven't but I may have misunder
Jim, I use the rear Packet jack for AFSK and all filtering is available. Press the Packet and LSB buttons on the front. 73, Don VE3XD _______________________________________________ WriteLog mailing
I tried it and cannot make it work on a new MPVF.. Tom Hz something. then on the setting up afsk with _______________________________________________ WriteLog mailing list WriteLog@contesting.com htt
I got the info from ON4ADZ and another guy on the list that you have to use packet (lsb) mode, using rear packet jack and than you are able to TX via PACKET and receive with CW filter turned on. TNX
I decided to try my own advice and switch to AFSK and it does´nt work as I thought it should. I could have sworn I had afsk working under 'user mode' but it doesn´t. My apologies to all f
For RTTY (RTTY MODE, PKT MODE, PKT/LSB or ???), nothing I can do with my new MK V FIELD (so far) results in having available the same NAR NAR1 NAR2 filter selections as when using the CW Mode (2.0 50
Does anyone know if this also holds true for the 200W Mark V (non-field) version as well? I'm in the market for a new/used rig and if that's the case, I'll stick to the tried and true FT-1000MP (non
My Mark V works FB in RTTY mode...NAR, NAR1 and NAR2 all function properly, same as in CW mode... Don't know exactly how it was set up to do this, but it has ALL available filters installed...I bough
Thor, Your comments and experience are quite interesting. Yes, there are "key clicks" associated with FSK. I use AFSK with the RITTY program by K6STI. That program switches tones at the zero degree p
Tom, Be advised that the GOOD filters on the IC756proII are only available in the LSB-D modes not in the RTTY. So we must have a new generation of designers who have not operated the radios they desi
I have never explored the use of the LSB-D mode on my 756PRO because I fell in love with the TPF RTTY filters. I liked the TPF RTTY performance so much I bought another 756PRO for the SO2R setup. How