- 1. [WriteLog] Chopped CW (score: 1)
- Author: aa0yx1@attbi.com (Denis Campbell)
- Date: Tue, 19 Feb 2002 03:27:57 -0000
- I'm using Window 98 SE with a 1Ghz PIII and had a terrible time with coppy CW. Using Com 1 for the Rig (FT-1000MP), and using the DTR line for CW on the same port. It was so bad at time I had to shut
- /archives//html/WriteLog/2002-02/msg00413.html (7,074 bytes)
- 2. [WriteLog] Chopped CW (score: 1)
- Author: windev@inetmarket.com (Gerry Hull)
- Date: Tue, 19 Feb 2002 08:24:15 -0500
- We ran M/S in ARRL CW this past weekend -- 4003Qs with three operating positions, each running Writelog on dual monitors. It was interesting that we had two of the computers with identical setups - I
- /archives//html/WriteLog/2002-02/msg00419.html (8,614 bytes)
- 3. [WriteLog] Chopped CW (score: 1)
- Author: gbaron@charter.net (GilBaronW0MN)
- Date: Tue, 19 Feb 2002 08:22:21 -0600
- Yes fast find is a horrible application that should be destroyed. Later versions of office do not use it.
- /archives//html/WriteLog/2002-02/msg00422.html (9,892 bytes)
- 4. [WriteLog] Chopped CW (score: 1)
- Author: K4IA@aol.com (K4IA@aol.com)
- Date: Tue, 19 Feb 2002 11:11:10 EST
- --part1_160.906a67c.29a3d31e_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Could the problem be the LPT1 port? Seems to me that printers print a lot slower tha
- /archives//html/WriteLog/2002-02/msg00424.html (10,476 bytes)
- 5. [WriteLog] Chopped CW (score: 1)
- Author: Steve Baron - KB3MM" <SteveBaron@starlinx.com (Steve Baron - KB3MM)
- Date: Tue, 19 Feb 2002 18:00:05 -0000
- LPT ports do not have a priority and do nothing by themselves. They simply respond to the commands sent by a driver. There may be some printer drivers which do interfere with sending CW on the LPT po
- /archives//html/WriteLog/2002-02/msg00426.html (9,469 bytes)
- 6. [WriteLog] Chopped CW (score: 1)
- Author: K4IA@aol.com (K4IA@aol.com)
- Date: Tue, 19 Feb 2002 14:23:30 EST
- --part1_11c.ca1601c.29a40032_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Steve Thanks for setting me straight on the printer port priority issue. I thought I
- /archives//html/WriteLog/2002-02/msg00428.html (8,499 bytes)
This search system is powered by
Namazu