I spent several frustrating hours prior to getting into CQ WW CW this = weekend trying to get both rig control AND cw keying to work in = Writelog. Finally had to give up and go back to using CT, but
Steve, There is no reason for you to have this problem - aside from some sort of configuration not being right. Also, the LPT CW interface should work for you without any trouble. The reason I say th
I am using WriteLog and CW keying works fine. I am running XP for the OS but that should not be the problem (unless you try to use LPT for CW) so I will give you my setup. I would not try to use LPT
The only thing I can think of that might be happening here is that when you turn on rig control, WL won't send CW on an F key if the rig is reporting its in a mode other than CW. You didn't say anyth
Problem fixed, thanks to Gil and Wayne's responses. It was so simple that I feel really stupid. The problem was that Writelog thought the radio was in LSB mode. So when I enabled rig control, Writelo
I see it is possible to use the same port for rig control and CW but you have to perform surgery on your cable. That is why I would not do it, but if you are short of ports, you can.