- 1. [WriteLog] Setting up ports (score: 1)
- Author: w1rwb@midcoast.com (Raymond W Brann)
- Date: Mon, 17 Jun 2002 13:41:04 -0400
- Hi, Using 1022b and trying to set up CW keying. I have my interface (rigblaster) on Com 6 (don't want to change this) and will try to use this for sending CW. As you know only com 1 thru 4 are shown
- /archives//html/WriteLog/2002-06/msg00246.html (6,741 bytes)
- 2. [WriteLog] Setting up ports (score: 1)
- Author: Georgek5kg@aol.com (Georgek5kg@aol.com)
- Date: Mon, 17 Jun 2002 14:15:11 EDT
- Ray, To the best of my knowledge, you must use Comms 1 thru 4 to interface WL to radios. In my case, I use Comm 1 and 2 to interface directly to two radios. Lpt1 connects directly to my SO2R Master,
- /archives//html/WriteLog/2002-06/msg00250.html (7,461 bytes)
- 3. [WriteLog] Setting up ports (score: 1)
- Author: Zev.Darack@banklink.com (Darack, Zev)
- Date: Mon, 17 Jun 2002 14:17:42 -0400
- You can only use 4 com ports with WriteLog and which 4 depends on the settings in the ini file. [Ports] CommSlot1=1 CommSlot2=2 CommSlot3=3 CommSlot4=4 COM1:=9600,n,8,1 COM2:=9600,n,8,1 COM3:=9600,n,
- /archives//html/WriteLog/2002-06/msg00251.html (7,741 bytes)
- 4. [WriteLog] Setting up ports (score: 1)
- Author: scot@k9jy.com (Scot Herrick)
- Date: Mon, 17 Jun 2002 13:47:43 -0500
- " If you want to use a Comm port above Comm 4, you will want to modify your WriteLog.ini file to match up with what is in the Help file. The Help file notes the following: "There are 4 'slots' avail
- /archives//html/WriteLog/2002-06/msg00253.html (8,749 bytes)
This search system is powered by
Namazu