Alan, I would check power source before doing anything else. Are you running on an internal battery, or a wall-wart/vehicular adapter? If an internal battery, I would check the contacts for corrosion
I have tried the Li battery, the AA battery unit, and the factory AC adaptor. I even cleaned all battery contacts with a contact cleaner. -- Alan Larsson KC2GOC / NYSING-305 http://www.alstown.com We
Hello everyone, I hope someone can help, my FT-767GX suddenly went very deaf, the RX is not dead and with the pre-amp on it is almost usable but a S9 signal on another radio is not even an S1. Has an
I pulled my FT-2400 out of my truck when I got ready to trade trucks. Well I let it set on shelf for 6 plus months and decided to hook it back up. When I applied power the read only shows 28.000. I c
Replacement batt. Was that a good one ? Be aware when manipulating these back-up batt. a short C/C and its gone. Did you put the batt. in place with the right polarity. Could there be a rom device th
Couple of questions.. My 757GX display is off by 0.2. 1. Freq is 7.245.0 but it displays 7.244.8 how can I correct this ? 2. Is there a mod to have a 6th 0 show on the display ?
First THANK YOU for your time/help !! The old battery is dead (.00218 volts) New battery (3.29 volts) is installed correctly. What I'd had not done was set the VFO ranges! After programming as descri
Can you help me please, to know me the pin-out of hand micro MH-1 B8 ??????????? I have two, and i need to adapt one them to my TX/RX mobile P. Lincoln. Many thanks for the help ! ?lvaro Rocha CT0126
Couple of questions.. My 757GX display is off by 0.2. 1. Freq is 7.245.0 but it displays 7.244.8 how can I correct this ? 2. Is there a mod to have a 6th 0 show on the display ?
Restoring an FT-101E that is exhibiting an unusual problem. The power output is intermittent occasionally when keyed. At times it is full output, and then when keyed again power drops to only a few w
Hi to the Gang. I have recently (somewhat) installed an RF Speech Processor onto my FT-101EX, which is the last step in bringing my rig up to "E" configuration. I have long had all the optional cryst
For Sale: Accessory items for either VX-5 or VX-1 dual band HTs and others in that series: Yaesu MH-34 speaker microphone This is the one that fits the Yaesu VX-5, VX-1, and that series of HTs. It ha
Hello from Jim -- N8LUV, I have a very clean and working until about 3 weeks ago FT-767. The problems are two-fold. The first noticable problem is the output. On any band the output will vary by it j
Hi all, I'm a newbe of the group. I'd like to insert additional filters from Inrad into my 920 but I wanted to know what you guys think on this issue, I guess it has already been discuss in the past
Tnx for the positive feedback Sid. 73 Dan, IK2SGL Dan, Friend & I did the Inrad mods to my 920. Works great, instructions with their kit were very detailed. Well worth it. I'd like to hear about any
Hi Dan, IK2SGL I'm OZ5RZ Benny, me and my friend OZ1KNK Jacob did the job and we are very happy for the enhancement, it is a easy task, and you will feel like having got a new radio (almost) :-) . Yo
Thank you for the info David and Benny, I'll place an order to Inrad for sure. 73 de Dan, IK2SGL --Original Message-- From: Ho Family [mailto:af4bh@zoomtown.com] Sent: sabato 10 maggio 2003 20.03 To: