Hi: I agree, give it a try with the radials you have now and if thats not good add some 17 meter ones or puttraps in the ones that you have for 30 meters. Have a gud day and see you on the air. 73 Bo
I have been round and Round looking for these specs, but as yet have not. What are the RX/TX limits of the ft-1500 after the MARS/CAP mod is done?? Anyone know? I will be eternally grateful. Thanks i
KZ2G asked: The beauty of the Ten-Tec is that they current limit the finals, so you can drive just about anything as an antenna with one without a tuner & not have to worry about something going wron
FOR SALE: Yaesu FT-101EE Transceiver in immaculate condition. Looks unbelievably good for its age. Comes with SP-101 speaker and original manual, AC and DC cables. Very clean inside and out. No dents
Can I connect my Alpha 274 direct to data connector instead of tx ground relay S2002 ? The relay give a lot noise on cw. tks for info 73 ON5JY Wim mvg. Willem Braeckevelt Neon Elite Pittem NV Tel +/3
The new 17-meter Pro-Am mobile whip is up with those 30-meter 1/4-wave radials. Works great from astounding height of 14 feet. Catch u guys on 18 mhz soon. 73. Bob, KZ2G -- 10-10 # 10148 -- Omni 6 Pl
Hi all, The indicator on my G-1000SDX control box no longer works. The direction indication is the same with or without the rotator cable plugged into the box. The pot in the rotator seems to work co
Does anyone out there have detailed information on the Band Data port on the Mark-V? I am in the process of designing an interlock system that will allow 2 Mark-V's to operate together during a conte
While operating two radio in a recent RTTY contest and not paying attention managed to over expose my #2 radio with RF. Symptoms are weak RX. TX and all other functions appear to be normal. No obviou
Hi, a question about ft1000 CAT programming.: Does anyone knows a routine to extract the full 1636 bytes strem from ft1000 CAT in visual basic o near programming language ?? Thanks in advance. ea7cdu
Hello All I was looking for a YO-100 and came across this unit at a good price. But now I wonder if I will be able to use it. Is anyone using the YO-901 Multiscope with the FT1000MP? What about the A
U will need to build an up converter to use the 901 scope with the any of the 1000 series. Works fine for RF envelope and audio wave form monitoring... 73s, dave wa3gin
I'll be on 18.135 mhz + or - depending on how busy the freq is. I'll be at Jones Beach, NY, depending on the weather. Time will be 2:15 PM NY time, 18:15 GMT. I'll be running 20 watts. Bob, KZ2G -- 1
Hi everyone. I am new to this reflector. I have been a long time Yaesu person. I have a chance to buy a Yaesu G 400 RC rotator and plan to use it on a two element 'Gem Quad'. There is little informat
Folks, Would anyone happen to have an electronic copy of the operating manual for an FT-727R they could send me or point me to? Thanks! 73, Dave AG4PJ == -- Regards, Dave AG4PJ@yahoo.com ____________
Having a problem with the interface to my FT-747, the isolation transformer when connected to the mic in causes the radio to go into the "scan" mode. I was able to stop it with a capacitor in the mic