Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Glenn\s+Martin\s+Hazer\s+Use\s+Query\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Glenn\s+Martin\s+Hazer\s+Use\s+Query\s*$/: 6 ]

Total 6 documents matching your query.

1. Glenn Martin Hazer Use Query (score: 1): Author: boley.d@wcsmail.com (Dick Boley); Date: Sat, 24 Aug 1996 08:30:20 -0400; Probably asked before but considering using a Hazer on Rohn 25G 40' to 50' with only top guys attached to tower (not Hazer). Would appreciate any comments on approach or experiences. Also, can I use; /archives//html/Towertalk/1996-08/msg00227.html (6,937 bytes)
2. Glenn Martin Hazer Use Query (score: 1): Author: K7LXC@aol.com (K7LXC@aol.com); Date: Sat, 24 Aug 1996 18:47:24 -0400; Hi, Dick -- The Rohn book specifies one set of guys for a 40 foot tower and two sets for 50 feet. I would follow the factory recommendations. The Hazer system is a lightweight setup that has some app; /archives//html/Towertalk/1996-08/msg00229.html (7,507 bytes)
3. Glenn Martin Hazer Use Query (score: 1): Author: Hamforever@aol.com (Hamforever@aol.com); Date: Mon, 26 Aug 1996 22:23:26 -0400; I use the hazer on a 50 ft. tower with guys attached to the hazer with no problems for four years. I have a 2 element 40 meter beam and an A3 Cushcraft mounted on the hazer. Why mount the guys to the; /archives//html/Towertalk/1996-08/msg00244.html (6,992 bytes)
4. Glenn Martin Hazer Use Query (score: 1): Author: boley.d@wcsmail.com (Dick Boley); Date: Tue, 27 Aug 1996 07:18:29 -0400; John; This is a good area for discussion. My rationale for permanent top guy attachment was to allow "extended" work on the antenna/rotor and to allow dropping it in the event of the probability of v; /archives//html/Towertalk/1996-08/msg00247.html (7,557 bytes)
5. Glenn Martin Hazer Use Query (score: 1): Author: w7ni@teleport.com (Stan Griffiths); Date: Tue, 27 Aug 1996 15:03:51 -0700 (PDT); Hi Dick, What am I missing here? If you guy the tower permenently at the top, how do you get the Hazer and the antenna mounted on it above the top set of guys? I has to be above the top set of guys t; /archives//html/Towertalk/1996-08/msg00254.html (8,166 bytes)
6. Glenn Martin Hazer Use Query (score: 1): Author: boley.d@wcsmail.com (Dick Boley); Date: Wed, 28 Aug 1996 07:49:30 -0400; Probably won't solve thsi without photos... According to the Glenn Martin web site you disconnect 2 guys at ground level (already attached at top). Probably position them to not interfere with the an; /archives//html/Towertalk/1996-08/msg00258.html (9,303 bytes)

Current List: 1 - 6
Page: [1]