- 1. NoAlox, Penatrox, etc (score: 1)
- Author: km9p@contesting.com (Bill Fisher, KM9P)
- Date: Sun, 28 Jul 1996 21:47:28 -0400 (EDT)
- Can you put too much of this junk on the joints of the antenna? Bill -- --
- /archives//html/Towertalk/1996-07/msg00170.html (6,866 bytes)
- 2. NoAlox, Penatrox, etc (score: 1)
- Author: K7LXC@aol.com (K7LXC@aol.com)
- Date: Mon, 29 Jul 1996 00:59:30 -0400
- Hi, Bill -- Yes. It can absorb water so just enough to coat the joint and wipe off the excess. 73, Steve K7LXC
- /archives//html/Towertalk/1996-07/msg00174.html (6,778 bytes)
- 3. NoAlox, Penatrox, etc (score: 1)
- Author: aa7bg@initco.net (AA7BG Matt Trott)
- Date: Sun, 28 Jul 1996 23:19:48 -0600
- I dunno, but allow me to digress: I use something called OXGARD. I think/hope it's the same stuff. I put a smear of it on a non-metallic flat surface yesterday so I could see how conductive it was. I
- /archives//html/Towertalk/1996-07/msg00175.html (7,407 bytes)
- 4. NoAlox, Penatrox, etc (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Mon, 29 Jul 1996 11:00:22 -0400
- << towertalk@paris.akorn.net Can you put too much of this junk on the joints of the antenna? Bill >> Of course, it may drip some on warm days if you _really_ over do it.... don't stand directly under
- /archives//html/Towertalk/1996-07/msg00177.html (6,816 bytes)
- 5. NoAlox, Penatrox, etc (score: 1)
- Author: G3SEK@ifwtech.demon.co.uk (Ian White, G3SEK)
- Date: Mon, 29 Jul 1996 14:17:30 +0100
- There's a film of grease around each metal particle, but the grease itself is non-conducting. It needs the clamping force between two pieces of metal to force away the grease and make the particles b
- /archives//html/Towertalk/1996-07/msg00180.html (8,006 bytes)
This search system is powered by
Namazu