- 1. Topband: Fw: WD-1 Wire impedance (score: 1)
- Author: HAROLD SMITH JR <w0rihps@sbcglobal.net>
- Date: Mon, 10 Oct 2016 18:24:00 +0000 (UTC)
- -- Forwarded Message -- From: Herbert Schoenbohm <herbert.schoenbohm@gmail.com> To: topband@contesting.com Sent: Monday, October 10, 2016 11:54 AM Subject: Re: Topband: WD-1 Wire impedance Some discu
- /archives//html/Topband/2016-10/msg00023.html (8,958 bytes)
- 2. Re: Topband: Fw: WD-1 Wire impedance (score: 1)
- Author: "Richard (Rick) Karlquist" <richard@karlquist.com>
- Date: Mon, 10 Oct 2016 13:41:08 -0700
- Hi Herb and all, When I was in the Army, 1958 to 1960,, I was a "Field Communications Crewman". It meant, I helped string telephone wire. We used what was called WD-1TT. It was two separate conductor
- /archives//html/Topband/2016-10/msg00027.html (8,976 bytes)
- 3. Re: Topband: Fw: WD-1 Wire impedance (score: 1)
- Author: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
- Date: Mon, 10 Oct 2016 17:00:23 -0400
- But believe the WD1A really works well at this QTH in both forward and reverse modes. I have made many direct comparisons on extreme DX on 160 and the WD1A was the difference it too to hear the weak
- /archives//html/Topband/2016-10/msg00028.html (12,384 bytes)
- 4. Re: Topband: Fw: WD-1 Wire impedance (score: 1)
- Author: Merv Schweigert <k9fd@flex.com>
- Date: Mon, 10 Oct 2016 11:06:54 -1000
- It works well, I use the transformer set up made by C&S engineering, now with DXE I think, and WD1 wire. I used to use electric fence galvanized steel wire for beverages and two wire beverages back i
- /archives//html/Topband/2016-10/msg00030.html (10,072 bytes)
- 5. Re: Topband: Fw: WD-1 Wire impedance (score: 1)
- Author: Mike Waters <mikewate@gmail.com>
- Date: Mon, 10 Oct 2016 16:52:14 -0500
- Here is a thread from 7/23/12 that may answer this question. This URL is only one post in the thread. Follow it down from there. lists.contesting.com/pipermail/topband/2012-July/038223.html 73, Mike
- /archives//html/Topband/2016-10/msg00033.html (8,542 bytes)
- 6. Re: Topband: Fw: WD-1 Wire impedance (score: 1)
- Author: Mike Waters <mikewate@gmail.com>
- Date: Mon, 10 Oct 2016 16:57:54 -0500
- Sorry, that's not the correct thread. I'll have to find it later. It had to do with with a ham in Finland (?) who actually did some measurements and may have posted them online. 73, Mike www.w0btu.co
- /archives//html/Topband/2016-10/msg00034.html (9,577 bytes)
- 7. Re: Topband: Fw: WD-1 Wire impedance (score: 1)
- Author: Mike Waters <mikewate@gmail.com>
- Date: Mon, 10 Oct 2016 17:20:18 -0500
- Hi Gary, Thanks. This must be it. Hope it helps the OP. win.i1wqrlinkradio.com/archive/OH2BEN_Reversible_ Beverage_Array-20-10-2007_04d.pdf 73, Mike www.w0btu.com _________________ Topband Reflector
- /archives//html/Topband/2016-10/msg00035.html (9,438 bytes)
- 8. Re: Topband: Fw: WD-1 Wire impedance (score: 1)
- Author: "K1FZ-Bruce" <k1fz@myfairpoint.net>
- Date: Mon, 10 Oct 2016 21:01:23 -0400
- RF measured two different batches of the Plastic covered WD-1A wire. One was 130 ohms and the other was 150 ohms. Lot of hams use it for two wire beverages with good luck. 1. Remember postings sa
- /archives//html/Topband/2016-10/msg00039.html (13,006 bytes)
This search system is powered by
Namazu