Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Topband\:\s+aluminum\s+\"penetrating\s+oil\"\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Topband\:\s+aluminum\s+\"penetrating\s+oil\"\s*$/: 6 ]

Total 6 documents matching your query.

1. Topband: aluminum "penetrating oil" (score: 1): Author: Roger Graves <ve7vv@shaw.ca>; Date: Mon, 1 Aug 2016 15:50:48 -0700; I need to separate KLH 3 inch aluminum boom sections. When assembled 20 years ago I used Penetrox on them so hopefully they are not welded together. In fact one of them separated 1/2 inch then stuck.; /archives//html/Topband/2016-08/msg00001.html (6,545 bytes)
2. Re: Topband: aluminum "penetrating oil" (score: 1): Author: Greg Zenger <n2gz@gregzenger.com>; Date: Mon, 1 Aug 2016 19:41:28 -0400; Hi Rod, Sorry to hear about your troubles. The sticking may not be aluminum corrosion, but might be a burr on one of the through holes, which could be digging into the other member and possibly exace; /archives//html/Topband/2016-08/msg00002.html (8,788 bytes)
3. Re: Topband: aluminum "penetrating oil" (score: 1): Author: Grant Saviers <grants2@pacbell.net>; Date: Mon, 1 Aug 2016 17:38:07 -0700; I've been using PB Blaster penetrating oil with good success. Since you know there are Penetrox particles (it is zinc dust plus castor oil per the MSDS) between the tubes, I'd try to wick some PB in; /archives//html/Topband/2016-08/msg00003.html (7,953 bytes)
4. Re: Topband: aluminum "penetrating oil" (score: 1): Author: "David Harmon" <k6xyz@sbcglobal.net>; Date: Tue, 2 Aug 2016 02:01:25 -0500; I too have used PB Blaster in the past and it does work....BUT......don't get any of that stuff on you or the XYL will make you sleep in the dawg house! You will stink so damn bad that the dawg will; /archives//html/Topband/2016-08/msg00004.html (9,568 bytes)
5. Re: Topband: aluminum "penetrating oil" (score: 1): Author: "Clive GM3POI" <gm3poi2@btinternet.com>; Date: Tue, 02 Aug 2016 03:08:55 -0500; Rod, The best type I have come across is PB Blaster (made in Ohio), best left overnight in difficult situations and another spray in the morning. 73 Clive GM3POI I need to separate KLH 3 inch aluminu; /archives//html/Topband/2016-08/msg00005.html (7,976 bytes)
6. Topband: aluminum "penetrating oil" (score: 1): Author: Roger Graves <ve7vv@shaw.ca>; Date: Wed, 3 Aug 2016 13:06:17 -0700; Thanks to all who provided much helpful advice. I have the KLM 3 inch boom sections apart now. The 20 year old Penetrox coating had done its job of preventing aluminum corrosion, but the castor oil h; /archives//html/Topband/2016-08/msg00009.html (10,767 bytes)

Current List: 1 - 6
Page: [1]