- 1. Topband: coax soldering (score: 1)
- Author: Larry via Topband <topband@contesting.com>
- Date: Sun, 4 Dec 2016 14:50:55 -0500
- hi guys, planning on installing some more beverages. i have a roll of CATV 75 ohm cable. it is the kind with a double shield. aluminum wrap over tinned copper shield. there is some kind of sticky on
- /archives//html/Topband/2016-12/msg00026.html (6,726 bytes)
- 2. Re: Topband: coax soldering (score: 1)
- Author: Renee K6FSB <k6fsb.1@gmail.com>
- Date: Sun, 4 Dec 2016 12:03:56 -0800
- I think the best method is F connector, snap and seal, if you must have a 259 use an adapter. Renée, K6FSB planning on installing some more beverages. i have a roll of CATV 75 ohm cable. it is the ki
- /archives//html/Topband/2016-12/msg00027.html (8,087 bytes)
- 3. Re: Topband: coax soldering (score: 1)
- Author: DXer <hfdxmonitor@gmail.com>
- Date: Sun, 4 Dec 2016 15:31:45 -0500
- That's exactly what I've been doing for some years now. I buy the cable already terminated with F connectors, and add BNC, PL259, or N adapters as required. Not the most efficient as far as minimizin
- /archives//html/Topband/2016-12/msg00028.html (8,810 bytes)
- 4. Re: Topband: coax soldering (score: 1)
- Author: MICHAEL ST ANGELO <mstangelo@comcast.net>
- Date: Sun, 4 Dec 2016 15:56:19 -0500 (EST)
- I don't like soldering to coax connectors and use crimp connectors. I know they made BNC crimp connectors for RG-6. They may make crimp type PL259 connectors for RG-6. Another option is to stick with
- /archives//html/Topband/2016-12/msg00029.html (9,710 bytes)
- 5. Re: Topband: coax soldering (score: 1)
- Author: Mike Waters <mikewate@gmail.com>
- Date: Sun, 4 Dec 2016 16:25:09 -0600
- Larry, K6FSB and N2MS just gave you the correct answer! You'll need the correct stripping and crimping tools, and the right snap-and-seal connectors. It's a one-time, low-cost investment that will sa
- /archives//html/Topband/2016-12/msg00032.html (8,397 bytes)
- 6. Topband: coax soldering (score: 1)
- Author: "Craig Clark" <jcclark@myfairpoint.net>
- Date: Mon, 5 Dec 2016 14:34:46 -0500
- Message: 1 Date: Sun, 4 Dec 2016 14:50:55 -0500 From: Larry <pacer99@aol.com> To: topband@contesting.com Subject: Topband: coax soldering Message-ID: <158cb63a7fa-2fd9-563d@webprd-m107.mail.aol.com>
- /archives//html/Topband/2016-12/msg00058.html (8,348 bytes)
This search system is powered by
Namazu