- 1. Topband: doublet as marconi (score: 1)
- Author: Mike DeChristopher <mfdechristopher@gmail.com>
- Date: Wed, 10 Apr 2019 13:33:19 -0400
- Topbanders, During the winter, an icy pine branch saw fit to down my 160 inverted-L and so I've begun planning a replacement. As we're allegedly headed into the spring, and as it is unlikely I'll get
- /archives//html/Topband/2019-04/msg00025.html (7,478 bytes)
- 2. Re: Topband: doublet as marconi (score: 1)
- Author: Tim Shoppa <tshoppa@gmail.com>
- Date: Wed, 10 Apr 2019 14:16:15 -0400
- Mike, just like you plan to do, I use a doublet on 80 and up, and tie the feed line together at the base and feed it against ground as a Marconi T on 160M. I use Deltrol 900-series open frame 30A rel
- /archives//html/Topband/2019-04/msg00027.html (9,653 bytes)
- 3. Re: Topband: doublet as marconi (score: 1)
- Author: GEORGE WALLNER <aa7jv@atlanticbb.net>
- Date: Wed, 10 Apr 2019 14:22:20 -0400
- Mike, I had such a set up in Arizona. It worked well. The tuner was at the base of the antenna. I used two vacuum relays to bypass the balun and short the two sides of the ladder line. GL and 73, Geo
- /archives//html/Topband/2019-04/msg00028.html (8,292 bytes)
- 4. Re: Topband: doublet as marconi (score: 1)
- Author: "Richard (Rick) Karlquist" <richard@karlquist.com>
- Date: Wed, 10 Apr 2019 14:22:37 -0700
- My plan is a 200' doublet (100' each side) about 100' high fed with ladder line. At the base will be a legal limit remote autotuner and thereafter hardline to the shack. That setup should handle 10-8
- /archives//html/Topband/2019-04/msg00030.html (8,019 bytes)
This search system is powered by
Namazu