I ran across a sketchy reference to this idea, described as a way to block common mode signals from making it into the shack by cutting off the paths from the coax shield to the RX input. Is there an
Author: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
Date: Sat, 29 Nov 2014 01:04:43 -0400
Pete. Here I used RG6 crammed with 10 turns on two 3" toroid on each side of a ground block for every cable. The common point ground block is about 10 feet from the shack and consists of the over the
I ran across a sketchy reference to this idea, described as a way to block common mode signals from making it into the shack by cutting off the paths from the coax shield to the RX input. Is there an
My question then is: 1. Does a multiple sets of grounding blocks for the RG--6 outside the shack hooked to a common point ground hurt anything? 2. Does a toroid ring on each side of the grounding blo
My question then is: 1. Does a multiple sets of grounding blocks for the RG--6 outside the shack hooked to a common point ground hurt anything? It doesn't hurt anything. It actually helps everything.