- 1. Topband: mounting ladder line (score: 1)
- Author: howk2@hotmail.com (Howard Klein)
- Date: Sun, 27 May 2001 19:25:19
- Any suggestions for securing 450 ohm ladder line to .5 inch pvc poles while maintaing the correct orientation? Howard..K2HK _ -- FAQ on WWW: http://www.contesting.com/FAQ/topband Submissions: topband
- /archives//html/Topband/2001-05/msg00070.html (7,184 bytes)
- 2. Topband: mounting ladder line (score: 1)
- Author: baycock@HIWAAY.NET (Bill Aycock)
- Date: Sun, 27 May 2001 21:05:46 -0500
- HowardWhat I do is slit the end of the pipe deep enough for the line, and tape it in. However, for my information- just what is the correct orientation? Bill-W4BSG -- FAQ on WWW: http://www.contestin
- /archives//html/Topband/2001-05/msg00071.html (7,288 bytes)
- 3. Topband: mounting ladder line (score: 1)
- Author: DGB" <dgbcms@netnet.net (DGB)
- Date: Sun, 27 May 2001 21:17:46 -0500
- Black tie wraps! Dwight W9YQ -- FAQ on WWW: http://www.contesting.com/FAQ/topband Submissions: topband@contesting.com Administrative requests: topband-REQUEST@contesting.com Problems: owner-topband@c
- /archives//html/Topband/2001-05/msg00072.html (7,223 bytes)
- 4. Topband: mounting ladder line (score: 1)
- Author: n0tt1@juno.com (n0tt1@juno.com)
- Date: Mon, 28 May 2001 17:47:59 +0100
- Hi Howard, One could simply cut a slot at the top end of the pvc pipe and then drill a small hole completely through the pipe at a 90 degree angle to the slot, just large enough to accept a short pie
- /archives//html/Topband/2001-05/msg00077.html (7,739 bytes)
- 5. Topband: mounting ladder line (score: 1)
- Author: w8ji@contesting.com (Tom Rauch)
- Date: Mon, 28 May 2001 18:16:52 -0400
- Hi Howard, What do you mean by "correct orientation"? I know there are rumors that for receiving applications the conductors have to be in a certain physical arrangement with one above the other, bu
- /archives//html/Topband/2001-05/msg00078.html (7,781 bytes)
- 6. Topband: mounting ladder line (score: 1)
- Author: Billg@warwick.net (Bill Gerhold)
- Date: Mon, 28 May 2001 20:54:54 -0700
- Do what I did, use your vertical PVC pipe with a PVC "T" connection on the top. Run your ladder line through it. Please do not use and conducting materials at all near or through the ladder line. A n
- /archives//html/Topband/2001-05/msg00080.html (7,503 bytes)
- 7. Topband: mounting ladder line (score: 1)
- Author: richard@karlquist.com (richard@karlquist.com)
- Date: Tue, 29 May 2001 04:06:51 -0000
- K2WH: I do this with my homebrew open wire line. I use a router to cut the slots. Photos on my web site: http://www.karlquist.com/Irrigation/irrigation.html scroll down and click on "open wire line".
- /archives//html/Topband/2001-05/msg00086.html (7,622 bytes)
This search system is powered by
Namazu