Results:

References: [ loctite: 138 ]

Total 138 documents matching your query.

101. [TowerTalk] SS bolts in Aluminum (score: 2)

Author: K7LXC@aol.com (K7LXC@aol.com)

Date: Tue, 3 Aug 1999 11:24:50 EDT

Goop? The only thing I would suggest is to use an anti-seize on SS nuts and bolts to prevent them from galling. SS into aluminum shouldn't be subject to this problem. This was on the mast clamp of Or

/archives//html/Towertalk/1999-08/msg00031.html (7,439 bytes)

102. [TowerTalk] SS bolts in Aluminum (score: 2)

Author: tleaf@hotmail.com (Ted Leaf)

Date: Tue, 03 Aug 1999 03:23:29 PDT

Hi Guys, Is goop recommended when screwing stainless steel bolts into threaded aluminum rotor mounting brackets? There were earlier posts on TT of using Loctite because some bolts have vibrated loose

/archives//html/Towertalk/1999-08/msg00029.html (7,260 bytes)

103. [TowerTalk] Orion rotator application note (score: 2)

Author: W6MR@pacbell.net (Joe Clement)

Date: Sat, 27 Mar 1999 12:35:06 -0800

I have had 4 of the rotators fail, the bolts tear out from the base. It could be fixed by opening up the mold to allow more material around the bolts. The material is less than that the engineering h

/archives//html/Towertalk/1999-03/msg00509.html (15,828 bytes)

104. [TowerTalk] Orion rotator application note (score: 2)

Author: km1h@juno.com (km1h@juno.com)

Date: Fri, 26 Mar 1999 12:56:56 -0500

On Mon, 22 Mar 1999 18:18:19 -0800 dan hearn <dhearn@ix.netcom.com> writes: He told me the same thing when my donut ( BMW vibration dampener) failed causing $1200 worth of repairs to the tower. Howev

/archives//html/Towertalk/1999-03/msg00497.html (14,066 bytes)

105. [TowerTalk] Orion rotator application note (score: 2)

Author: jrdavis@crnotes.collins.rockwell.com (Jeffrey R Davis)

Date: Tue, 23 Mar 1999 08:26:43 -0600

Although perhaps overkill for the application, if you really, really, REALLY don't want bolts to back out, the military and aircraft industry way is to safety wire them. Two posts, one mentioning rac

/archives//html/Towertalk/1999-03/msg00447.html (10,248 bytes)

106. [TowerTalk] Orion rotator application note (score: 2)

Author: rnezelek@netacc.net (R. Nezelek)

Date: Tue, 23 Mar 1999 06:45:59 -0500

FYI, there are similiar mounting bolt loosening problems with HDR-300 rotors. I also double nut the mounting bolts. Bob, W2CNS@arrl.net -- FAQ on WWW: http://www.contesting.com/towertalkfaq.html Subm

/archives//html/Towertalk/1999-03/msg00442.html (13,377 bytes)

107. [TowerTalk] Orion rotator application note (score: 2)

Author: dhearn@ix.netcom.com (dan hearn)

Date: Mon, 22 Mar 1999 18:18:19 -0800

During a conversation w Mike a week ago he said that M2 abandoned the rubber donut shock absorber because the bolts loosened and gave trouble. He also said that rotator mounting bolt loosening is a f

/archives//html/Towertalk/1999-03/msg00434.html (11,449 bytes)

108. [TowerTalk] greased bolts? (score: 2)

Author: mgilmer@gnlp.com (Gilmer, Mike)

Date: Fri, 29 Jan 1999 13:15:57 -0500

This appears to have said it all. It sure seems, with most rotators anyway, we are between a rock and a hard place (maybe not hard enough, hi). Aluminum threads are being pulled on by a steel bolt th

/archives//html/Towertalk/1999-01/msg00550.html (11,689 bytes)

109. [TowerTalk] Fastening rotors in towers - was Sheared rotor bolts, and Loctite (score: 34)

Author: K7NV@contesting.com (Kurt Andress)

Date: Thu, 28 Jan 1999 23:20:45 -0800

Hi all, Some good information passed around on this one. Regular inspection is certainly the best way to find problems before they get out of hand. Correctly selected thread locking measures are esse

/archives//html/Towertalk/1999-01/msg00535.html (14,799 bytes)

110. [TowerTalk] loctite on ham-4 bolts? (score: 34)

Author: bragassa@cnt.ru (Mike Bragassa)

Date: Thu, 28 Jan 1999 08:28:40 +0300 (MSK)

A simple fix I have used is to put a dab or two of Dow Corning type silicon on the bolt (and nut, if is not a threaded-in connection like the base of a rotor). I would not recommend to glob up these

/archives//html/Towertalk/1999-01/msg00512.html (8,572 bytes)

Current List: 101 - 110
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14]