3830
[Top] [All Lists]

[3830] W7WHY CQWW SSB Test

To: <3830@contesting.com>
Subject: [3830] W7WHY CQWW SSB Test
From: w7why@mail.coos.or.us (Tom Osborne)
Date: Mon, 26 Oct 1998 22:30:48 -0800
1998 CQWW DX TEST

Callsign: W7WHY
Country:  United States
Mode: SSB
Class: SO/HP
 
      BAND     QSO's    PTS    ZONES  COUNTRIES

      160        0        0      0       0  Inverted "L"
       80        0        0      0       0  Dipole at 80 feet
       40        4        6      3       3  3 phased verticals
       20       75      218     14      35  Homebrew 3 el. mono.
       15       67      188     17      26  Homebrew 2 el mono.
       10       30       83     11      12  Single delta loop
     ---------------------------------------------------

     Totals    176      495    45      76  =>  59,895
 
 All exchanges were 59(9).
 
 Equipment Description: FT-840, FL-2100B (sometimes)
 
 Soapbox:   
Boy, Murphy struck with a vengence this weekend. Started out pretty well
Friday night, but when I got up Sat. morning, things changed.  The rotor
was stuck to JA, and couldn't get it to turn.  Finally found a broken
rotator wire about halfway up the tower.  Fixed that and then the amp
wouldn't work. Everytime I got up to about 250 watts, it would trip out
and shut down.  Then the tuned input on 20 quit working.  SWR was 5 to 1
and and adjusting it made no difference.  Also found a grid bypass cap
on one of the tubes went south. Got that all back together, then I found
that I had no grid bias.  At that point I said to heck (or words of that
nature) with it and quit.  Everything worked
perfectly all week before the contest.  Oh well, there's
always next year!!
 
 
 Club Affiliation: Southern Oregon DX Asc. (SODA)
 
 I operated without cheating and followed all the rules.
 
 Tom W7WHY

--
FAQ on WWW:               http://www.contesting.com/3830faq.html
Submissions:              3830@contesting.com
Administrative requests:  3830-REQUEST@contesting.com
Problems:                 owner-3830@contesting.com


<Prev in Thread] Current Thread [Next in Thread>