Amps
[Top] [All Lists]

[AMPS] Improvements to L-4B PS?

To: <amps@contesting.com>
Subject: [AMPS] Improvements to L-4B PS?
From: dick@merlin.libelle.com (Dick Flanagan)
Date: Mon, 26 May 1997 13:28:10 -0700
>IMO, Dick, raising the anode supply to 4kV will increase RF output by
>about 2db and decrease the amount of drive power needed to produce 0.8A
>of anode current.  .Is 2db worth the effort?

I am interested more in increased reliability than in increased output.
For example, would 1N5408's be a good replacement for the original diodes,
etc?

>Another useful mod would be high speed T/R switching.

I have obtained an Ameritron QSK-5 in the hope of satisfying this
particular need.

Thanks for the comments.  They're appreciated.

73, Dick

--
Dick Flanagan W6OLD CFII Minden, Nevada
Visit http://www.delphi.com/electronic/



--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread] Current Thread [Next in Thread>