Amps
[Top] [All Lists]

[AMPS] Re: resistance

To: <amps@contesting.com>
Subject: [AMPS] Re: resistance
From: k4auw@juno.com (k4auw@juno.com)
Date: Tue, 25 Nov 1997 12:09:47 -0500
Hello all,

Wonder if anyone has ever acurately measured a reistor for a parasetic
supressor before assembly, soldered it to the PS inductor, then
un-soldered and re-measured the value?  I would be interested in the
value change for various resistor compositions from the heat of the
solder de-solder process if proper heat sinking was done.

73....Ron

On Tue, 25 Nov 1997 08:33:28 +0008 "George T. Daughters"
<gdaught6@pobox2.stanford.edu> writes:
>
>hi all,
>
>rich wrote...
>
>> If your amplifier arced mysteriously, it might be interesting to 
>measure 
>> the resistance of the VHF parasitic suppressor resistor.  
>
>it is perhaps important to note that an increase in the resistance of 
>a composition resistor (or a film resistor, too) can increase when 
>the resistor gets too hot.  (rich has said this, too.)  it doesn't 
>have to be so hot that it bakes the color bands to new colors.  the 
>point i want to convey is that it doesn't *have* to be a parasitic 
>oscillation that causes this change.  i've seen resistors in dc power 
>supplies increase by a factor of 3 or 4 by chronic overheating, but no 
>
>smoke was emitted.
>
>73,
>George T. Daughters, K6GT
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>