Amps
[Top] [All Lists]

[AMPS] Alpha 78 Input matching unit

To: <amps@contesting.com>
Subject: [AMPS] Alpha 78 Input matching unit
From: w4eto@rmii.com (Richard W. Ehrhorn)
Date: Tue, 3 Mar 1998 23:15:47 -0000
 Hi Arturo & all..

You're right - at the time the '78 was designed and for most of its 
production life most transceivers had tuned-output, vacuum tube amps so the 
"flywheel" of a tuned-input PA wasn't necessary.

I think you'll find that the length of drive cable between transceiver and 
amp input can make a big difference. Frankly I can't remember the optimum 
length, but if yours isn't somewhere close to 5-6 feet you might try that 
length of RG-58/U & see what happens. Maybe someone else on the reflector 
knows the optimum length for sure?

73,      Dick W0ID

-----Original Message-----
From:   Arturo Gargarella [SMTP:AGargarella@sipetrol.com.ar]
Sent:   Monday, March 02, 1998 9:28 PM
To:     amps@contesting.com
Subject:        [AMPS] Alpha 78 Input matching unit

I can remember I read in this reflector someone saying "I can?t achieve
more than 840 Watts with very low grid current (something like 20 mA)".
I experienced the same on 10 and 15 meters. From 20 to 80 I can run a
little more than 1 KW.
I use a TS850 to drive it.
I think there is a problem with the input matching unit.
They use a resistor pack which total resistance is about 22 ohms and it
is in paralell with the input.
Maybe it was ok at the time the 78 was designed (high output electron
tubes transceivers) but now with solid state ones there must be some
changes. I tried giving more output (140 W) to the 850 and I could
achieve 1 Kw on 10 meters and 1.3 KW on 80 meters. That was only for
test purposes.

Is that the problem ?

Does anyone know the reason of such input matching unit design ?.

Is there anything to improve ?

Thanks in advance for the help
73 de Arturo, LU6ETB



--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>