>My copy of the
>MA-COM/OMNI-Spectra catalog does not list a single APC-7 to SO-239/PL-259
>adapter or even a SMA to SO-239/PL-259 adaptor.
I've never seen that either. Most of the network analyzers I have used
do have APC-7's on them. However, generally these have either APC-7 to N
adapters on them or cables attached. The other end of the cable is
generally an N or SMA. A good lab will have both.
It is VERY simple to obtain an N to PL-259 or N to SO-239 adapter. This
is not a problem at all. I have several myself.
Then it is not really a big deal to make up a set of cal standards for an
open, load and short.
Then you are all set.
73,
Jon
KE9NA
-------------------------------------
Jon Ogden
KE9NA
http://www.qsl.net/ke9na
"A life lived in fear is a life half lived."
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|