Martin Ellis wrote:
>
> > I am a bit apprehensive about just replacing the CAP
> > and tube before being certain that it won't do a repeat
> > when I fire it up.
>
Tks Martin & Rich :
BTW Martin had look at the grid chokes lunch time
and sure enuff the one on the "Clinton" tube side had gone
south. The xformer looks OK but will have to run some more
checks yet.
Rich the filament xfrmr problem happened exactly that way and
had to be replaced.
I guess I like to think that if you ignore a problem long enuff
mebbe it will go away , no such luck !!
73 Gus VO1MP
> Hello Gus,
> Be sure you check the two 470 uH grid chokes for continuity.
> Then check the bias voltage supply, to ensure that a possible
> grid-filament short did not damage it.
> Regards,
> Martin ZL1ANJ
>
> --
> FAQ on WWW: http://www.contesting.com/ampfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|