Amps
[Top] [All Lists]

[AMPS] 9:1 Balun and NI 450 resistor

To: <amps@contesting.com>
Subject: [AMPS] 9:1 Balun and NI 450 resistor
From: jackg@one.net (jeg)
Date: Sat, 31 Oct 1998 11:35:27 -0500
Hi,

When Bob posted:

>This method is used in the "Aerocom" 6 channel 1kW SSB/CW HF 
>transmitter.
>The exciter drove the 4CX1500B tetrode with 3 watts in a passive 
>grid
>circuit with broadband matching network to the grid ... from 
>memory (this
>was 15 years ago) it was a simple 9:1 toroid transformer with a 
>450 ohm termination/grid damping resistor.  

it reminded me that I have a Mitch Cox custom wound 160-10 meter 
9:1 balun and a 450 ohm CESIWID Inc. 100 watt NI resistor that I 
was going to use in a passive grid amp.  I paid $100 for the resistor 
and $25 for the balun.

Anyone interested?  I will sell the balun and resistor for $70.

Thanks,

Jack, WB8BFS
jackg@one.net


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] 9:1 Balun and NI 450 resistor, jeg <=