Sounds like an open in the path between the tank coil and the load cap.
Recheck your wiring and also look for what blew the switch in the first
place.
73 Carl KM1H
On Sun, 17 Jan 1999 20:32:36 EST DanAF9R@aol.com writes:
>
>Hi
>I am working on a Yeasu FL2100B that I had to replace the band switch
>due to
>fried switch contacts (output side). Now that it is fixed I still
>have no
>output. When I apply drive I get some plate current (very little
>output) and
>can get a dip with the plate cap. However the loading cap has no
>affect at
>all. More drive does not help either. Are there some checks I can
>make to
>narrow this down. If the tubes are bad is there a way to check them?
>Thanks
>Dan AF9R
>DanAF9R@aol.com
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|