>Hello and thanks for reading this,
>
>I have big problems with my yeasu fl2100b Amplifier.
>I have a pair of new tubes in it because one ore two tubes are getting a
red
>color, when I tune with low power ( 5 watts input).
>The power output seems good only on the 80 meter band I can get a dip or
>full power with the tubes.
>Also with one tube (572B) the onetube installed for testing is colored red,
>With my old tubes I get the same problem as above.
>I have cleaned the bandswitch and the coaxrelais and all that is okay.
>The resitors on both tubes are also new so that must be no problem.
>
>Do you recognize this problem, please send me an e-mail.
>
>Best regards from Theo PA3ERL
>=================================================
>Theo Koning PA3ERL
>
>Internet E-Mail: pa3erl@xs4all.nl
>Homepage PA3ERL: http://www.xs4all.nl/~pa3erl/index.html
>
>Member Radio Club Kennemerland PI4RCK
>Homepage PI4RCK: http://www.qsl.net/pi4rck/index.html
>Homepage PI4COM: http://www.muurkrant.com/pi4com/pi4com.html
>==================================================
>
>
>
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|