Amps
[Top] [All Lists]

[AMPS] My ham radio history (the early days)

To: <amps@contesting.com>
Subject: [AMPS] My ham radio history (the early days)
From: km1h@juno.com (km1h@juno.com)
Date: Sat, 30 Jan 1999 13:28:35 -0500


On Wed, 27 Jan 1999 15:33:25 -0500 (EST) "William L. Fuqua III"
<wlfuqu00@pop.uky.edu> writes:
>
>  
>  Some years ago when I was in the 9th grade I started building
>my first Ham transmitter. I wanted a Viking Valiant for Christmas
>but parents could not afford such an expensive transmitter.
>  I designed a TX with a 6AG7 crystal oscillator (had a HG-10B vfo 
>also)
>a 6L6 buffer multiplier and a pair of 6146B's in the final. The 6146B 
>was
>a new tube then. It would run about 200 Watts plate input power. One 
>fifth
>of the legal limit those days.
>  My parents had a charge account at one of the electronics 
>distributors
>in Nashville and I talked them into funding the project. "It was 
>going
>to save them money", I said. 
>  Now I realize that my parents made the best decision possible.
>Not to buy a higher power transmitter but to allow me to design my
>own and learn from it.
>  Well, some months later it was still not working and I had gone
>quite a bit over budget. My father came down to the shack to see
>what I was up to after receiving a bill from ELECTRA Distributing Co.
>He asked what I was spending so much money on.
>  I told him that I seemed to make one mistake after another and
>had to replace a number of components that burned out while testing
>the TX.
>  He then said." Making mistakes is not a bad thing. You can learn 
>from
>your mistakes. Just don't learn so much at one time."
>I never forgot that conversation.
>  
>  The transmitter worked just fine finally. The next year I entered
>it into the science fair and only got an honorable mention. The
>judges could not believe I had done it all by myself even after
>interviewing me and discussing it with my science teacher.
>  I'll have to admit that I learned a great deal from this experience
>and later I discovered that I could build transmitters from all sorts
>of used parts from old televisions, radios and junk dealers around 
>town.
>I also did a great deal of horse trading with some hams for parts.
>  For the next science fair I added a plate modulator that I had built 
>and
>worked my way up to 3rd place. Again they could not believe I had 
>built the
>thing by myself.
>  Later I got a Central Electronics 10A sideband exciter with the 
>modified
>ARC-5 for a VFO. That then drove my 6146B's.
>During a trip to Florida I got an old transmitter with some 813's and 
>salvaged
>the power supply and used my 6146B's to drive a pair of 813's. The 
>place I got
>it from was HS Electronics in Miami. HS I think stood for Ham Shack.
>A friend of mine W4WHB sold me his HT-4 which was the civilian 
>version
>of the BC-610 with loads of spare tubes. Being a collage kid by this 
>time
>and eager to get more power I scrapped it and built a amplifier with 
>a
>pair of 250th's in grounded parallel. They worked just fine. I tried 
>to
>run 3 of them but the 6146Bs just were not up to the task. Not enough 
>drive.
>  Now I just wish I still had the HT-4. They are quite a collector's 
>item now.
>I paid $20 for it and about the same for the 813 transmitter.
>After that I had moved up to the 20A exciter and build the big power 
>amplifier
>out of a 4-1000A. I had a power supply with a tapped auto transformer 
>that
>would give me any voltage from 2KV to 15KV. Never ran it in to a 
>amplifier
>at more than 5KV. But I did run it up to 15KV with no load just to see 
>if
>it would do it. Those mercury vapor 872As really lit up.
>My mother would just come in to see the light show when I was on the
>air and had the lights turned out. The plates of the final tubes 
>would
>glow red on voice peaks and the rectifiers would make a neat 
>pulsating
>purple glow as well. That along with the pulsating hum from the power
>transformer (amplified by the floor boards ) really gave a ham a
>sense of POWER. I'm looking forward to building a new amplifier and 
>firing
>it up. Just have to find the spare time.
>  While other guys were hot rodding cars I was doing ,more or less, 
>the
>same with my ham station.  Really had a good time fooling with RF 
>stuff and
>now days still do. Really do a lot here at work. It is truly amazing 
>how
>much RF technology is used in physics research and astronomy.
>
>73
>Bill wa4lav
>
>PS I am now building another 4-1000 amplifier. 
>
>  William L. Fuqua III  P.E.  E-mail WLFUQU00@POP.UKY.EDU  Phone (606) 
>257-4155
>  Department of Physics and Astronomy      CP-177 Chem. Phys. Bldg.  
>  University of Kentucky ,                 Lexington, Ky 40506-0055


Great tale Bill! Mine is somewhat a parallel.

At Bishop Loughlin HS in Brooklyn, NY there was a full blown ham club and
station. A Meisner EX Signal Shifter VFO driving a home brew 813 with PP
811 modulators and a HQ-129X rcvr with a Hallicrafters Pandadaptor. The
antennas were a Telrex 10/15/20M Xmas tree on a freestanding Aeromotor
tower on top of the 5 story school. There were several hams among the
Christian Brothers faculty and it did not take me long to get hooked at
age 14. CW was a foreign concept but I had to learn it if I wanted to do
more than listen.
I learned CW on a WW2 code tape reader and got my Novice 3 months from
the start of studying. This was Nov 24, 1955.
My first TX was a 6AG7-6L6 out of the ARRL Handbook  and a regen RX from
Popular Mechanics.
After 11 months I passed my General, got involved in AF MARS,
cannabilized a pair of BC-610's and had my first KW at age 17.  Went thru
various ARC-5 TX and RX stages but finally wound up with a Viking 1 and
HQ-129X.  
Joined the Navy in Oct 1959 and got a fantastic education at ET School
and hands-on shipboard duty.
Joined National Radio Oct 1963 and as they say the rest is history. 

I envy those who were able to go on to college but it just was not in the
deck I was dealt.

73  Carl  KM1H


___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>