Meggitt Electronic Components make a range of non inductive power resistors.
They are small so need to be bolted to a heatsink. I think 47R is the
nearest they do to 50R, or you can parallel a pair of 100R types.
e.g. 2x 20W TO220 will make a 40W load costing about GBP 5.
They also do 100W and 250W bolt on types. Available in the UK from Farnell
Electronics. RS do a bigger range.
I have used them at HF and they work well.
73 Fraser G4BJM
-----Original Message-----
From: owner-amps@contesting.com [mailto:owner-amps@contesting.com] On Behalf
Of NI4L
Sent: 03 February 1999 11:44
To: amps@contesting.com
Subject: [AMPS] 50 ohm 50 watt resistor...
Have limited space need 2 of these any one have cant be any bigger than
4 inches long.
thanks chris
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|