[AMPS] YC-156

Amps

[AMPS] YC-156

To:	<amps@contesting.com>
Subject:	[AMPS] YC-156
From:	ericw@accessone.com (Eric Wicklund)
Date:	Tue, 23 Feb 1999 17:36:54 -0800


What is the best way to set up the drive for the YC-156?  Since the cathode
is connected to
one side of the filament, do you run a trifilar choke with bias on the extra
choke leg?  I'm hoping to do this without a CT filament transformer.
Comments?

Eric KR7A


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] YC-156, (continued) [AMPS] YC-156, Arne Gjerning [AMPS] YC-156, Bob Marston [AMPS] YC-156, Terry Gaiser [AMPS] YC-156, Rich Measures [AMPS] YC-156, Joe Subich, W8IK/4 [AMPS] YC-156, Peter Chadwick [AMPS] YC-156, Rich Measures [AMPS] YC-156, Rich Measures [AMPS] YC-156, Bob Marston [AMPS] YC-156, Norman Hockler [AMPS] YC-156, Eric Wicklund <= [AMPS] YC-156, Steve

Previous by Date:	[AMPS] YC-156, Norman Hockler
Next by Date:	[AMPS] Hamfest amp, Shane KI4M/KV4I
Previous by Thread:	[AMPS] YC-156, Norman Hockler
Next by Thread:	[AMPS] YC-156, Steve
Indexes:	[Date] [Thread] [Top] [All Lists]