Amps
[Top] [All Lists]

[AMPS] SELL: HV plate chokes

To: <amps@contesting.com>
Subject: [AMPS] SELL: HV plate chokes
From: w2cqm@juno.com (Ronald Lumachi)
Date: Tue, 18 May 1999 07:28:59 -0400


> SELL: National Radio stacked bobbin type HV plate chokes. Two 
>available-one vertical, one horizontal mounting. Will handle about 
>800ma.$15 ea shipped
>
>HV plate choke  on 1" Micarta tubing wound with 5" of #22 
>enamel wire.  Insulated threaded base for thru-chassis mounting. Will 
>handle 1-1/2-2amps. Overall length about 7".  $20 shipped 
>
>HV plate choke (1) wound on 1" Micarta fibreglass/resin tubing. 5" of 
>#20 gauge wire with insulated,  threaded base for thru-chassis 
>mounting. >Will handle well over 2 amps. Overall length about 7". $25
shipped.
Note! Micarta tubing is top of the line material and costs about $10 a
foot. A 
>quality component.  Can send photo attachment via AOL.  Ron W2CQM New 
>York City 

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] SELL: HV plate chokes, Ronald Lumachi <=