Still trying? Does anyone have details of the 10m mods for this amp? I have
a unit that is giving no output on 10m but fine on other bands. I have the
export model so presume everything should be there. There is no marking on
the front panel bandswitch other than the AUX position, however, the
bandswitch has another position after AUX so I presume this is for 28Mhz and
29Mhz. There appears to be the input filter for 10m on the ATI6 board.
There are taps on the PA tank coil that are switched in for the AUX and
AUX+1 position.
BTW this is a No Tune version (LK500-NTC).
Any info will be gratefully received..
73 de Tony, VE3RZ
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|