>
>Hello,
>
>
>>>>Would like to hear from anyone who has "hands on " experience with the
>>>>Henry 2KD amplifier.
>>For laughs, try measuring the filament voltage of a 2KD-5 at the tube
>>sockets. ......
>>- Rich..., 805.386.3734, www.vcnet.com/measures.
>
>I have added 20cm length steel wire with 1 mm dia in series
>for the filament of 3-500Z in my 2KD-5. Resulting
>the voltage became just 5.0V. It was 5.5V before steel wire
>added.
>
>'73 de JA2DHC/1 Kazuo Ohashi
And this was in Japan where they do not have 240v mains. In the U. S.,
the filament voltage is even higher.
tnx, Kazuo.
- Rich..., 805.386.3734, www.vcnet.com/measures.
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|